“Methanol Economy ” concept by the Nobel Prize winner George A. Ola in 2006 in his book “Crossing the oil and gas era methanol
economy ,” a book first proposed and discussed in detail . Its important background and theoretical basis is: With the reduction of
oil and gas resources, particularly the arrival of peak oil , the world will face a serious energy crisis. In response to the Continue reading
Last week, border , port KCl mainstream situation remains steady. Border crossings arrival is still relatively slow , now Russia’s red port delivery price of around 1,900 yuan / ton, white potassium 2020-2050 yuan / ton , the recent Russian red and supply of ; harbor tight supply, the majority of traders in the hands of non- supply , plus the price of white 2200-2250 yuan / ton, the Russia-Belarus quoted in 2150-2220 yuan / ton, the Russian red in the 2030-2080 yuan / ton, slightly lower , where high prices are mainly concentrated in the south harbor. Large particles offer in 2350-2380 yuan / ton. With domestic rail freight increase potassium chloride salt lake , station prices rose 40-50 yuan / ton. Nur potassium traders pick the price will also increase 40-50 yuan / ton.
Market Analysis , February downstream potassium fertilizer procurement in general, coupled with the port to the shore after the end of February is expected to increase , domestic potassium have started , the market outlook is bearish sentiment increased. Especially concerned with the Northeast market demand decline, the customs border goods market will be affected. But in the short term , the potassium chloride market remains temporarily in short supply , the price is still capable firm. In addition , investors also need to pay close attention to the case of imported potash shipped .
Potassium sulfate compound fertilizer good demand downstream , Mannheim started acceptable factory orders filled , the higher offer, plus shipping Lop tight , so the short-term market conditions still remain strong potassium .
Future Forecast : I expect the recent KCl temporarily remain stable, high potassium remains strong.(http://www.lubonchem.com supply)
LUBON INDUSTRY CO.,LTD. as a professional chemical manufacturer ,is specialized in producing the sodium carboxymethyl cellulose (CMC) for several years, products sell well both at home and abroad.The price and the quality can be best.
Sodium carboxymethyl cellulose has widely use in our daily life.Mainly can be perfected as follows:
Food grade
CMC in Food Industry
It is widely used in frozen desserts, protein food, beverages, icings, dressings, instant noodles, etc.
Properties
1. Thickening: It can produce high viscosity at low concentration. It also acts as lubricant.
2. Water retention: It is a water binder, helps increase shelf life of food.
3. Suspending aid: It acts as emulsifier and suspension stabilizer, particularly in icings to control ice crystal size.
4. Film forming: It can produce a film on the surface of fried food, eg. instant noodle, and prevent absorption of excessive vegetable oil.
5. Chemical stability: It is resistant to heat, light, mold and commonly used chemicals.
6. Physiologically inert: CMC as a food additive has no caloric value and can not be metabolized.
Characteristics
A. Finely distributed molecular weight.
B. High resistance to acid.
C. High resistance to salt.
D. High transparency, low free fibers.
E. Low gel.
Examples of application
Ice cream:
1.CMC can mix freely with milk, sugar, emulsifier and other ingredients.
2. It helps body formation of the ice cream.
3. It helps control ice crystal size and improves mouthfeel.
4. It brings glossy surface to the ice cream.
Dairy products:
1. CMC stabilizes yoghurt and prevents sedimentation.
2. It increases shelf life.
3. It improves mouthfeel.
Ceramic grade
1. CMC for ceramics features uniform distribution of substituents (carboxymethyl group) on the cellulose backbone. It produces fewer gel granules in glaze formulation.
2. It contains no colored impurity and is 100% combustible under firing condition, to ensure clean ceramic glaze.
3. It can stabilize physical and chemical property of glaze formulation.
4. It can improve glaze adhesion and reduce glaze cracking.
5. It facilitates formation of a smooth dense glaze layer.
6. It can improve the rheological property of glaze formulation.
7. The glaze viscosity is proportional to the concentration of CMC added.
Toothpast grade CMC
1, good compatability, can be mixed with various ingredients of toothpaste .
2, fine and glossy of toothpaste, no dehyration, no decladding .
3, good stability, suitable thickness; can offer toothpaste special comfortable mouthfeel and gloss.
Printing & dyeing grade CMC features:
1, good stability of viscosity .
2, good distribution uniformity of degree of substitution .
3, good fluidity of solution .
4, high water scrubbing rate .
Oil drilling grade
Petroleum grade Product features:
1, high degree of substitution, good uniformity of substitution .
2, high transparency, viscosity and water loss can be controlled .
3, suitable for fresh water, sea water, saturated brine slurry .
4, stabilize soft soil structure, prevent collapse of wall of a well .
5, can improve mud-making volum, reduce filteration loss .
6, has excellent performance in drilling of oil .
Battery grade
Battery grade CMC features
1, excellent hydrophilicity .
2, stable viscosity, high adhesive force .
3, good transparency and fluidity of aqueous solution .
4, low metal content .
CMC’s function in battery
1, good compatiblity; can be mixed with various metal powder .
2, can improve the voltage of battery, reduce essential resistance .
3, offer stable viscosity and adhesive force .
Paper-making grade
CMC is a high-efficiency paper-making auxiliary, and features good moisture retention, dispersibility
It’s application in papper-making industry
1. Pigment coating
·Control and regulate the rheology of coatings and dispersibility of pigments .
·Get pseudoplasticity of coatings .
·Improve the moisture retention of coatings .
·Has excellent film forming property.
2. Intracytoplasm adding
·Improve jordaning efficiency, shorten pulping time .
·Regulate electric potential of pulp .
·Improve the retention rate of additives, fillers etc.
3. Top sizing
·Has excellent rheology and film forming property .
·Reduce air hole on paper surface .
·Improve the brightness and gloss of paper .
·Enhance the stiffness and smoothness of paper .
·Increase the surface strength and abrasion resistance of paper .
If you have any questions, pls contact us without hesitation through these ways:
Lubon industry Co. Ltd.
Tel: 86-25-87775610, 86695610
Fax: 86-25-81991787
sales5@lubonchem.com
As a former darling of butadiene chemical market suffered cold in 2013 , the market price fell below the cost price. Although the market has warmed up, but this is not glory . Production capacity in the country continue to release , the influx of foreign products and the need not to force the other negative factors , the 2014 days of butadiene is not too good . Continue reading
.Due to weak demand, in 2013 , the domestic methanol market penetration of low light slow down after opening . After half a year after the grind , the probe in mid- July to the lowest point in nearly three years. Then, zoom in demand , domestic production increased production enterprises , foreign enterprises to focus on several major overhaul of methanol and other good push , methanol market rebounded strongly, such as rainbow rally . To mid- December , prices rose to the highest point of the year. Compared with mid-July , or more than 50%. But the end of the final stage , the surge in supply , downstream businesses continue to cut production due to the New Year under pressure factors , the price fell rapidly . Continue reading
China Chemical Chemical Product Price Index published online Show: 2013 Open 5971 points, up 6,015 points, the lowest 5290 points to close at 5486 points, compared with the 2012 closing 5904 points, a year fell 7.1 percent , the maximum amplitude of which was 13.7 years %. In 150 major chemical products, price monitoring , the rise of the product 54 , only 36% ; fell 96 products , up to 64 %. 2013 overall chemical market performance are : the first half continued to decline , bottoming out in the second half , but the rebound height is limited , the market center of gravity, the poor performance of most products , but there are some bright spots.
2013 products fell by over 60% hydrazine hydrate main products fell , rubber , sulfuric acid , butadiene and fertilizer . Continue reading
Plant extract is plant as raw material, in accordance with the need to extract, through physical and chemical separation process, directional gain and enrichment plants in the one or more active ingredients, without changing its effective component structure formed products.
There are many different varieties, plant extracts can be divided into pigment products, natural sweeteners, dietary supplements, medicinal materials, and cosmetics use oils, because these products for agricultural and forestry products, is easily affected by the weather, plant diseases and insect pests, planting area and other factors, so the raw material purchase price and quantity in different years there will be fluctuations, the price fluctuation of raw materials made of natural plant extracts product price, the production will have a certain degree of change, market supply and demand imbalance. Supply and demand changes unceasingly along with the year and various market factors, the imbalance between supply and demand situation has occurred.
In recent years, the plant extract more and more get the attention of medicine, food industry, although the plant extracts industry is an emerging industry, developing rapidly in the recent ten years. Plant extract industry has become one of the fastest growing industry in China, statistics show that in 2011 China’s plant extracts exports reached $1.13 billion, up 47% from a year earlier, compound growth rate of 21.91% in 2002-2011.
At the same time also to become the main force in Chinese exports, exports accounted for the proportion of total exports of Chinese medicine products more than 40%. In the first quarter of 2013 plant extracts in China imports and exports of $410 million, increased 12.1% year-on-year. Which exports to $330 million, rose 11.2%, accounting for 47% of the Chinese traditional medicine merchandise exports, plant extracts becoming the first Chinese medicine export more than $1 billion in merchandise categories.
In order to promote the healthy and sustainable development of plant extracts industry，In April 2012 medicare chamber of commerce has carried out “Standard of plant extracts of international business” And released in July 2013 the ginkgo biloba extract, cranberry extract, ginseng extract, giant knotweed extract, centella asiatica extract, extract quasi, milk thistle extract of seven plant extracts international business standards nternational business standards and release, will improve the plant extracts quality standard system, improve the industry admittance mechanism, strengthen self-discipline of the industry enterprises. Chinese plant extracts industry will become the new strategic pillar industry for national economic and social development.（Recommended Products:Spirulina）
Development of China’s petrochemical industry has achieved outstanding results but still severe overcapacity problem
National Petrochemical industry to improve carbon reduction targets early January , the state issued the ” industry response to climate change action plan ( 2012 to 2020 ) , requires that by 2015 the petrochemical , chemical industry carbon dioxide emissions per unit of industrial added value down 18 % in 2010 and 17 % higher than the previous two percentage points above target , the development of low-carbon industry has put forward higher requirements. Continue reading
Products significantly enhance the self-sufficiency rate to further expand the application fields
December 19 , reporters from the New Materials Co., Ltd. Nanjing Nuoao informed , as the company’s new 120,000 t and 100,000 t of propionaldehyde propanol stable device operation , in 2014 the production capacity of n-propanol reached 185,700 tons , has to meet the domestic market demand. Next few years, China’s import dependence on n-propanol will be further reduced , and gradually achieve self-sufficiency. Meanwhile, as the environmentally friendly alternative to the process of ” BTX” etc. accelerated solvent , n-propanol market demand will show a sustained growth. Continue reading