1 as a new feed additives. Hey Calcium weight gain, with calcium formate feed additive for piglets, pigs can promote appetite and reduce diarrhea rates. Add 1% to 1.5% calcium formate in piglets weaned can significantly improve performance. German study found that adding 1.3% calcium formate in weanling pig diets can improve feed conversion rate of 7% to 8%, adding 0.9 percent to reduce the incidence of diarrhea in piglets. Zheng Jianhua (1994) added to the 28-day-old weaned piglets diets 1.5% Calcium, feeding 25d, ADG improved by 7.3%, feed conversion ratio improved to 2.53%, protein and energy utilization increased by 10.3% and 9.8%, a significant reduction in diarrhea in piglets. Wu Star (2002) in crossbred weanling pig diets supplemented with 1% calcium formate, daily gain increased by 3%, feed conversion rate increased by 9%, diarrhea was reduced by 45.7%. Additional Note: The use of calcium formate effective before and after weaning, it is because their secretion of hydrochloric acid in piglets with age strengthened; Calcium contains 30% easily absorbed calcium in the diet should pay attention to the preparation of calcium and phosphorus adjust ratio.
2 used in the building. Quick coagulant for cement, lubricants, early strength agent. For building mortar with a variety of concrete, cement accelerate the curing speed, shorten the setting time, especially in the winter construction, to avoid condensation at low temperatures too slow. Fast release, to improve the strength of cement into use as early as possible. Calcium Uses: Various dry mortar, a variety of concrete, wear-resistant materials, flooring industry, feed industry, tanning. Calcium and attention to issues involved in dosage per ton of dry mortar, concrete amount of about 0.5 to 1.0%, the maximum dosage of 2.5%. Calcium dosage is decreased as the temperature gradually increased, even if the application amount of 0.3-0.5% in the summer, and will play a significant early strength
3. Domestic and international market research showed that adding 1% to 1.5% calcium formate in piglets weaned can significantly improve performance. German study found that adding 1.3% calcium formate in weanling pig diets can improve feed conversion rate of 7% to 8%, adding 0.9 percent to reduce the incidence of diarrhea in piglets.
Author Archives: lubon
ASPARTAME Features
Advantage
1981 by the U.S. FDA approved for food sprinkle dry, allowing the preparation of soft drinks in 1983 after more than 100 countries worldwide and has been approved for use in the region, 180 times as sweet as sucrose. Aspartame advantages are as follows:
(1) Security clear, is listed as GRAS grade so-called United Nations Committee on Food Additives (generally recognized as safe), for all the sugar substitute in the most thorough research on human security products, has been in more than 100 countries around the world more than 6000 kinds of products in the 19 years of successful experience.
(2) pure sweetness, and sucrose have very similar refreshing sweet, no bitter after taste and a metallic taste, is by far the closest to the successful development of sweetness of sucrose sweeteners. Aspartame is 180 times the sweetness of sucrose in a small number of applications can only achieve the desired sweetness, the use of aspartame instead of sugar in the food and beverage, and can significantly reduce the heat does not cause dental caries .
(3) mixed with sugar or other sweetener use of synergies, such as 2% to 3% in the saccharin can significantly mask the bad taste of saccharin.
(4) mixed with flavors, with excellent efficiency, especially for acidic oranges, lemons, grapefruit, etc., can make a lasting flavor, reduce the amount of air freshener.
(5) protein components, which can be naturally absorbed by the body decomposed.
Shortcoming
(1), acid, alkali poor thermal stability, strong acid or alkali hydrolyzed by heating at a high temperature is easy to produce bitter phenylalanine or di winded cefoperazone, inappropriate manufacturing temperature> 150 ℃ bread, biscuits, cakes and other baked goods and high-acid foods.
(2) Because aspartame decomposed in the gastrointestinal tract of the human enzyme phenylalanine, aspartic acid and methanol, the urine does not apply to patients with phenylketonuria require on the label marked “acetone, benzene in urine of patients should not use “warning. China approved in 1986 in food applications, commonly used in dairy products, candy, chocolate, chewing gum, table-top sweeteners, health food, pickles and cold products.
Its decomposition ingredient hazards:
Aspartame in the human body, the material is broken down into three categories: methanol (methanol, 10%) (highly toxic, blindness), day (gate) aspartate (asparticacid, 40%), and phenylalanine (phenylalanine, 50%). (Brain precipitation)
A methanol (methanol):. Methanol is a neurotoxin (neurotoxin) blinding, which in turn is broken down into formaldehyde (formaldehyde, a carcinogen), formaldehyde is absorbed (Source for a variety of body tissues: West a dental research, and study 2). Is oxidized to formaldehyde and then formic acid (formicacid, also known as formic acid) (Source). (Note: formic acid is a toxin secreted by the red imported fire ants or bees, ants bite or sting through to make defense and attack).
2 days (door) aspartate (asparticacid): It is an irritant toxin (excito-toxin), will stimulate nerve cells to death (Source). (Note: In the natural food aspartic acid, the molecules (molecules) are linked in their 彵 protein, so it will not as in diet soft drinks, have an impact to stimulate nerve cells to death.
3 Phe (phenylalanine):. Natural food which is an amino acid (amino-acid). However, stand-alone form, phenylalanine up to 15% in persons allergic to it, causing spasms (seizure), and convulsions (convulsion), and not the amount consumed (in English sources, and footnotes 1). In addition, phenylalanine can cause permanent brain damage and even death, especially a lot of eating, or during pregnancy. In the 1972 study, eating aspartame (Report Code SC-18862) monkey infants, convulsions and death.
Note: high blood pressure, urine acid (formicacid) and alanine (alanine, an amino acid), the level will be higher. One possible explanation is that these people are drinking a lot of sodas containing aspartame, and cause high blood pressure, and high levels of aspartame metabolites.
Acesulfame-K Applications
As a non-nutritive sweeteners can be used in solid drinks, pickles, preserves, chewing gum, table-top sweeteners in various foods.
The product has a strong sweet flavor similar nature and saccharin. Bitter taste at high concentrations. Non-hygroscopic, stable at room temperature, and sugar alcohols, sugar, etc. have a good combination. As a non-nutritive sweeteners can be used in a variety of foods. According to the provisions of GB2760-90, can be used in liquid, solid drinks, ice cream, cakes, jams class, pickles, preserves, chewing gum, table-top sweeteners, maximum use of 0.3g/kg.
Can be used in food, medicine and other sweeteners.
Uridine (UR) msds
Basic Information
Uridine
Product Code: SHG018
Chinese name: uridine (uridine)
Chinese alias: uridine, uridine, uridine
Name: Uridine
English Name: 1-β-D-Ribofuranosyluracil; Uracil-1-β-D-ribofuranoside
Linear Formula:
Purity: ≥ 99% (HPLC)
CAS: 58-96-8
Molecular formula: C9H12N2O6
Molecular Weight: 244.20
2 Performance description
Appearance Description: White needle crystal or powder; odorless. Slightly sweet and slightly acrid taste. Soluble, slightly soluble in dilute alcohol, insoluble in ethanol. Constitute a relevant component of animal cell nucleic acids.
Three physical parameters
Melting point: 162.0 ~ 171.0 ℃
Specific rotation: +6.0 ° ~ +10.0 °
Loss on drying: ≤ 0.5%
Residue on ignition: ≤ 0.1%
Heavy metal: ≤ 10ppm
Purity (HPLC): ≥ 99.0%
Content (UV): 98.0 ~ 102.0%
4 Use Description
Uridine is a drug, such as anti-giant red blood cell anemia, treatment of liver; cerebrovascular; cardiovascular and other diseases, but also the manufacturing fluorouracil (S-FC); nucleoside; idoxuridine (IDUR); bromine glycosides (BUDR); fluorine the main raw materials glycosides (FUDR) and other drugs.
Storage conditions: room temperature sealed dry preservation
5 Dangerous Description
Dangerous code: Xi
Hazard Class: R36/37/38
Security Level: S24/25-36-26
N-acetyl-L-tyrosine (ACETYLTYROSINE) Basic Information
Chinese name: N-acetyl-L-tyrosine
Chinese alias: acetyl tyrosine
English name: N-acetyl-L-tyrosine
English Name: L-TYROSINE, N-ACETYL-; [1] ACETYLTYROSINE; ACETYL-L-TYROSINE; AC-TYR-OH; AC-TYROSINE; N-AC-L-TYR; N-ACEYL-L-TYROSINE; (2S) -2 – (acetylamino) -3 – (4-hydroxyphenyl) propanoate
CAS :537-55-3
EINECS :208-671-3
MF: C11H12NO4
MW: 222.2178
Melting point: 149-152 ℃
Boiling Point: 531.3 ° C at 760 mmHg
Flash Point: 275.1 ° C
Vapor Pressure: 4.07E-12mmHg at 25 ° C
Specific rotation of 47.5 ° (c = 2, water)
N-acetyl-L-tyrosine is important fine organic chemical intermediates, widely used in medicine, pesticides, chemical industry and other fields
L-tryptophan Production Method
L-tryptophan produced mainly by chemical synthesis of the first method and the method of manufacture of a protein hydrolyzate. With the continuous development of microbial production of tryptophan research, people began using microbial fermentation method tryptophan. Now to practical and dominant. Microbiological method can be roughly divided into microbial fermentation and enzymatic conversion method. In recent years, there was even a direct fermentation and chemical synthesis, research and production of tryptophan direct fermentation and transformation Combination. Another technology, genetic engineering, enzyme immobilization and high density cultivation on microorganisms and enzymes breeding industry has greatly promoted the industrialization process of direct fermentation and enzymatic production of tryptophan.
Protein hydrolysis
L-tryptophan produced mainly by proteolysis first and chemical synthesis method. Protein hydrolysis method is based on hair, blood meal and waste as raw silk and other protein families, by alkaline hydrolysis and enzymatic hydrolysis method for producing L-tryptophan. With the development of amino acid production technology, it is now rarely used in the production of L-tryptophan.
Chemical synthesis
Chemical synthesis method is to use production methods of organic synthesis and chemical engineering technology or a combination of amino acids was prepared. DL-tryptophan chemical synthesis method can be broadly divided into two synthesis of indole synthesis as raw material and as raw material with phenylhydrazine. Snydcr and MacDonald developed a simple synthesis of DL-tryptophan
Method, i.e. the use of indole acrylic acid and α-acetamido direct condensation in the presence of acetic acid and acetic anhydride to give N-acetyl-DL-tryptophan, the substance can be hydrolyzed in a solution of sodium hydroxide to give DL-tryptophan, the yield was 57.7%. Moe with phenylhydrazine and MacDonald reported for the synthesis of tryptophan, i.e., in the presence of sodium acetate, and acrolein diethyl acetamido malonate condensation condensate is then reacted with hydrazine to produce phenylhydrazone in phenylhydrazone BF3 refluxing aqueous H2S04 or hydrolyzed cyclized compound 3 – indolyl – methyl – acetamido – malonate, hydrolysis of this compound can be obtained decarboxylation DL-tryptophan.
The biggest advantage is that the chemical synthesis method is not limited in the variety of amino acids, prepared either natural amino acids, unnatural amino acids can be prepared in a variety of special structure. This does not mean having a value of production industry, because the amino acid is synthesized racemic DL-type, must be split in order to obtain L-amino acids can be utilized. Therefore, when produced by chemical synthesis DL-tryptophan, synthesis conditions should be considered in addition to, but also consider the use of splitting with racemic isomer D-tryptophan isomers, three are indispensable. Thus, the chemical synthesis of L-tryptophan in industrial applications are also subject to certain restrictions.
Enzymatic conversion method
Enzymatic catalytic function is the use of microorganisms to produce L-tryptophan, L-tryptophan biosynthetic enzymes are able to use chemical precursors for the synthesis of raw materials, give full play to the advantages of both organic synthesis techniques, but also has the product high concentration, high yield, high purity, less byproducts, easy purification operation, etc., is a low-cost method for the production of industrial production of tryptophan. Currently in production of L-tryptophan is widely used. These enzymes include enzymes tryptophan, tryptophan, serine racemic enzymes. According to these enzymes provide the number of microbial species can be divided into double and single bacterial enzyme bacterial enzyme types.
Dual enzyme is using two strains of bacteria are needed to provide the enzymatic reaction of tryptophan synthase (TS), serine racemase (SR), indole and DL-serine as a substrate enzymatic conversion of L-color histidine. This method can be of high activity with different enzymes required for the enzymatic conversion of tryptophan together to achieve the advantages of complementary species, improve the conversion rate of the substrate. Makiguchi like E. coli tryptophan synthase and serine racemase from Pseudomonas putida, with DL-serine and indole as a substrate, the reaction in the reaction tank 200L 24h, L-tryptophan production can be achieved 110g / L, the absorption rate of 100% indole (molar ratio, the same below), the yield of DL-serine was 91%. Using a single strain of bacteria is provided by enzymatic synthesis of the desired enzyme tryptophan Trp, tryptophan, serine enzymes and enzymatic conversion of racemic tryptophan enzymes. Won-giBang bacteria and other single enzyme tryptophan production were studied using high-Ts activity of E. coli B10 conversion indole and DL-serine, adding non-ionic surfactant Triton X-100, 37 ℃ reaction 60h, tryptophan acid yield up to 141.4g / L, for a yield of 93.2% indole, the DL-serine yield of 93.6%.
Since the substrate tryptophan indole synthesis inhibitory strong and weak inhibition of the enzyme tryptophan, so in recent years tend to be more enzymes for tryptophan L-tryptophan biosynthesis. Normally tryptophanase degrades tryptophan, L-pyruvate, indole and ammonia, but at high concentrations of pyruvate and ammonia conditions effective to pyruvate, indole and ammonia synthesizing L-tryptophan acid. The enzyme can catalyze L-serine or L-cysteine and L-tryptophan indole synthesis. Nakazawa, such as indole to 20g, 30g sodium pyruvate, 50g ammonium acetate and 4gProteus rettgeri (Proteus Reye) bacterial enzyme tryptophan as a source, 37 ℃ reaction 48h could accumulate 23gL-tryptophan. Ujimaru other enzymatic tryptophan and L-serine with indole synthesis Achromabacterliquidum (Achromobacter liquid form) L-tryptophan, L-serine conversion was 82.4%, conversion of indole was 92.4%.
There are also a study of L-cysteine and indole as raw enzymatic production of L-tryptophan. Wei et tryptophan levels and gene engineering strain WWW-4 L-cysteine and the catalytic synthesis of L-tryptophan indole, 80mL reaction solution (L-cysteine 0.75g, 0.75g indole ) 37 ℃ reaction 48h, can accumulate L-tryptophan 1.18g, L-cysteine conversion was 93.2% and 90.1% conversion of indole, the recovery rate of 70% of total product. In addition, the strain has also been reported using enzymatic conversion of L-tryptophan in high yield and with a high activity of pyruvate enzyme tryptophan.
The enzymatic conversion method using a high activity can be either a tryptophan synthase, tryptophanase, or the catalytic activity of a synthetic cell tryptophan synthase enzyme L tryptophan or tryptophan, or the enzyme may synthesis of L-tryptophan or the immobilized cells. After the bacteria and enzyme immobilization of enzymes with improved stability to facilitate re-use, easy to implement continuous and automated production advantages. Won-Bang et polyacrylamide fixed tryptophan synthase having a high activity of Escherichia coli B10 E. coli bacterial cells, in a continuous stirred tank reactor 50 days of continuous use, a tryptophan synthase activity The 80% maximum acidogenic 0.12gL-1h-1. There immobilization techniques using other enzymatic conversion of L-tryptophan. Eggers et al reported a use of organic lipid membrane systems utilize tryptophan enzymatic conversion of L-tryptophan. It is cyclohexane as the organic phase, the organic resin film to two separate aqueous phase and an organic phase, wherein the aqueous phase having an enzymatic reaction system, constituting the aqueous phase was back-extracted another system, using bis-tris-propane as two water maintaining the two-phase buffers the pH of the aqueous phase difference, thus affecting the substances in the reaction system constant distribution of the two aqueous phases, the aqueous phase is then exchanged two L pyruvate and the organic phase through an anion exchanger Aliquat-336 – tryptophan. Such a system is conducive to the transport of L-tryptophan in the aqueous phase was back-extracted, and help reduce the extraction of L-tryptophan and the inhibition of the enzyme tryptophan; Moreover, the organic phase may also store indole, the concentration of indole in the enzyme reaction system is lower than the level of inhibition of the enzyme. Eggers et also established a reaction system of reverse micelles of the enzymatic conversion of L-tryptophan, it is dissolved in water containing tryptophanase reverse micelles of the surfactant Brij56 composed of cyclohexane and water phase , the use of indole and serine as a substrate in the organic phase was added Aliquat-336 anion exchanger and transfer the aqueous phase to the organic phase L-tryptophan. To buffer bis-tris-propane as a two-aqueous phase, select the appropriate parameters such as moisture content and pH conditions, results within 1dm reaction volume per g of tryptophan can produce the enzyme reaction after lh acid 10g. The advantage of the above system in addition to the lipid membrane of the reaction system, but also can improve the stability of the enzyme tryptophan. So, has broad application prospects in the enzymatic conversion of L-tryptophan.
Microbial fermentation
Microbial fermentation method including direct fermentation and added precursor fermentation.
A direct fermentation
Direct fermentation is glucose, cane molasses as carbon source of cheap raw materials, the use of tryptophan-producing excellent strain under suitable fermentation conditions, the direct fermentation of tryptophan. Strain tryptophan excellent high and stable yield is central direct fermentation studies. In breeding technology, the traditional mutation breeding and abroad have done a lot of research. Shiio etc. Brevibacterium tyrosine deficient for fluorophenylalanine (4FP) as the starting strains resistant mutants, breeding 5 – fluoro-tryptophan (5-FT) resistant mutant strain No. 187, the strain can produce L-tryptophan, 8.0 g / L. Continue to be No. 187 for the parent strain breeding with anthranilate structurally similar heavy chlorine serine (AsaSer) resistant mutant A100, its acid production rate increased to lO. 3 g / L, then from A-100 breeding sulfaguanidine (SG) resistant mutant strain S-225, which further improves the ratio of acid to 19g / L. Zhang Suzhen and others to domestic nitrosoguanidine Beijing Corynebacterium AS1.299, mutants obtained CG45. This strain has 5MT, 6FT, 4MP resistance marker, and the arginine and uracil as essential growth factors, in a medium containing 12% glucose, 30 ℃ shaking for 5 days. Can accumulate tryptophan 8g / L. The method of earlier studies, but not for a long time to reach the industrial production. The main reason is the biosynthetic pathway from glucose to tryptophan is relatively long, the metabolic flux is relatively weak and requires a variety of synthetic tryptophan precursor (PRPP, glutamine, L-serine). To further improve the yield of L-tryptophan must also increase production of these precursors. Tryptophan biosynthetic pathway hand adjustment mechanism is relatively complex, in addition to the presence of multiple feedback regulation, there also exists a weakening subsystem. This makes the amino acid tryptophan, an amino acid fermentation industry to become one of the most difficult fermentation. With the application of recombinant DNA technology in microbial breeding, for the excellent tryptophan Strains provide a reliable technical guarantee. Making acid levels gradually reached the industrial production requirement. Katsumata. The recombinant plasmid with R, DAHP synthase (DS) and tryptophan synthase (TS) gene introduced into the production of L-tryptophan 43g / L glutamicum KY10-894, allowing the engineering strain L-tryptophan production reached 66g / L acid levels increased by 54%.
2 Add the precursor fermentation
This method is also known tryptophan microbial conversion method, which is the use of glucose as a carbon source, while adding the required synthesis of tryptophan precursors (e.g., anthranilic acid, indole, L-serine, etc.), the use of microbial acid synthesis enzymes in the body prior to conversion to synthesize L-tryptophan. This method is very early into the industrial production, the world’s largest manufacturer of tryptophan Japan Showa Denko company is using anthranilic acid as precursors using Hansenula (Hansenula) or Bacillus (Bacillus coli) strains to convert tryptophan production methods, Yokozcnki like to DL-5-indole – methyl hydantoin as raw materials, the use of Flavobacterium T-523 which is the decomposition of tryptophan, L-tryptophan can produce acid 7.1 g / L. Breeding the Bacillus subtilis Fukui et 5 – fluoro-tryptophan (5-FT) resistant mutant strains, containing l% soluble starch and 5% glucose medium, the continuous fed-anthranilic acid, can accumulate L-color acid 9.6g / L. Nakayarna further transform this mutant such, it has a 5-FT and 8 – azaguanine (8-AG) double resistance in medium containing 10% glucose, the continuous fed-anthranilic acid, can accumulate L-tryptophan 15.6g / L.
The inadequacies of the microbial transformation is higher when converted precursor solution concentration, the conversion rate has dropped, but can be fed through a small batches to reduce its precursor inhibition. In addition, the precursors are expensive, is not conducive to reducing costs. Therefore, some studies use fermentation to provide a low-cost precursors, combined with the advantages of other methods were tryptophan production. Hajimu MOrikota other P390 Brevibacterium flavum using direct fermentation of L-glutamic acid-β-semialdehyde (GSA) was 13.2g / L, and after appropriate dilution of the broth was added phenylhydrazine 1mol/LH2S04 solution was heated at reflux for 1 hour after GSA 48% L-tryptophan can be converted to. SMgeru oita such dual use of lipoic acid and thiamine deficient strain Enterobacter aetogene LT-94, production of pyruvic acid 30g / L glucose in the medium containing 5%, then by adding ammonium chloride and indole using bacteria color neuraminidase enzymatic conversion of L-tryptophan 16.7%.
L-threonine Use
1 is mainly used as nutritional supplements. Easy generation of heat and glucose caramel and chocolate flavor, there flavoring effect. Can also be used for biochemical studies.
2 for nutritional supplements, threonine is an essential amino acid. Threonine often added to minors piglets and poultry feed, is the second limiting amino acids and third limiting amino acid in poultry feed, pig feed. Add in wheat, barley and other grain-based feed.
3 nutritional supplements, also for the preparation of amino acid infusion and comprehensive amino acid preparations.
4 for the adjuvant treatment of peptic ulcer. Also can cure anemia and angina, aortic inflammation, heart failure and other cardiovascular disorders.
5 Threonine (L-threonine) is W. C. Rose 1935 Isolation and Identification of a protein hydrolyzate from the fiber, essential amino acids has been shown to be the last to be found, it is the second or third limiting amino acid in livestock, which has extremely important physiological role in the animal . Such as to promote growth, improve immune function, etc.; dietary amino acid balance, the ratio closer to the ideal of an amino acid protein, thereby reducing the protein content of animal feed requirements. Lack threonine, can lead to lower animal feed intake, growth retardation, decreased feed efficiency, suppress immune function and other symptoms. In recent years, lysine, methionine synthetics been widely used in animal feed, threonine becoming affect animal performance limiting factor, further study of threonine help effectively guide the livestock and poultry production .
Threonine (L-threonine) animals can not synthesize itself, but the amino acid is required, can be used to accurately balance the amino acid composition of the feed to meet the need to maintain animal growth, improve weight gain and lean, reduce the meat material ratio; may improve the nutritional value of feed ingredients amino acid digestion rate and improve the performance of low-energy feed production; may reduce feed crude protein levels, improve feed nitrogen utilization, reduce feed costs; can be used for pigs, chickens, ducks and senior aquatic feeding and breeding. L-threonine is the use of bio-engineering principles, corn starch and other raw materials through submerged fermentation, refining and production out of the feed additive. Adjust the balance of amino acids in feed to promote growth and improve meat quality, improve the nutritional value of feed ingredients amino acids digest low, low protein feed production, contribute to conservation of protein resources, reduce the cost of feed ingredients, reduce animal manure and urine the nitrogen content, ammonia concentration and release of animal building speed. Widely used to add piglet feed, pig feed, chicken feed, shrimp feed and eel feed.
6 threonine (L-threonine) in vivo metabolism in the decomposition, not only after deamination and transamination effect, but directly through the threonine dehydratase, threonine and threonine dehydrogenase acid aldolase catalytic conversion of an amino acid other substances, e.g. threonine can be converted to butyryl coenzyme a, succinyl coenzyme a, serine, glycine and the like. Also threonine excess can increase the lysine-α-keto reductase activity gluconate, adding the right amount of threonine eliminate lysine in the diet due to excessive weight gain caused by decreased liver and muscle tissue protein / deoxyribonucleic acid (DNA), ribonucleic acid (RNA) / DNA ratio decreased. Add threonine tryptophan or methionine also reduce the growth inhibition caused by excessive. According to reports, the chicken to absorb most of threonine in the duodenum, crop Mang and glandular stomach quickly absorbed into the liver threonine protein deposition in the body.
L-glutamic acid Instructions for use
1, in the food industry: as a salt substitute, nutritional supplements, flavor enhancer (mainly for meat, soups and poultry). Broth and soups such as for convenience foods, 10g/kg. Used in beverages, bakery products, meat, meat, sausages, milk and dairy products, flavorings, cereal products, the amount of 400mg/kg. Used as a nutritional supplement, limit of 12.4% (based on the total protein in foods meter). Can be used as shrimp, crabs and other aquatic canned produce magnesium ammonium phosphate crystals preventing agent, the amount of 0.3% to 1.6%. L – monosodium glutamate (MSG commonly known as “MSG”) has a strong flavor of meat, sugar and salt is in addition to the world’s consumption of up to a flavoring agent. In particular, the PH value of 6 to 7, MSG all dissociated strongest flavor. Is widely used for cooking and food processing. The general dosage is 0.2% to 0.5%. Per capita daily intake does not exceed 6g / d. L-Glutamic acid salt for improving the bitterness of beer, but also useful as salt substitutes, nutritional supplements, flavoring agent.
2, in the pharmaceutical industry: L – Glutamic acid is non-essential amino acids, it is metabolized in the body. Easy to lose amino, and keto transfer reaction occurs, to the synthesis of other amino acids. After eating, there is 96% L – glutamic acid can be absorbed by the body, and therefore can be used as raw nutritional supplements “elemental diet” is used in clinical practice.
L-Cystine check
Acidity take this product 1.0g, add water 100ml, fully shaking determination (Appendix Ⅵ H) according to the law, pH value should be 5.0 to 6.5. Transmittance solution to take the product 1.0g, plus 1mol / L hydrochloric acid solution 20ml dissolved, according to spectrophotometry (Appendix Ⅳ A), measured at a wavelength of 430nm light transmittance of not less than 98.0%. Chloride take the goods 0.50g, after adding dilute nitric acid to dissolve 10ml, add water to make into a 50ml, dispensing 25ml, check (Appendix Ⅷ A) according to the law, compared with standard control solution made of sodium chloride solution 5.0ml, not thicker (0.02%). Sulfate take the goods 0.70g, add dilute hydrochloric acid and shake to dissolve 5ml, add water to make into a 40ml, according to inspection (Appendix Ⅷ B), 5ml compared with standard potassium sulfate solution 1.4ml dilute hydrochloric acid control solution made not more concentration (0.02%). Other amino acids take the goods, plus 1mol L hydrochloric acid solution / solution made from 10mg per 1ml, thin layer chromatography (Appendix Ⅴ B) test, learn the solution 2μl, points on silica gel G plate to positive butanol – water – acetic acid (5:2:1) as the agent, after the commencement of dried, sprayed with acetone solution (1 → 50) ninhydrin, dried at 80 ℃ 10 minutes and immediately view, in addition to the main spots, shall not significant other spots. Drying of the product, dried at 105 ℃ 3 hours, less weight loss should not exceed 0.2% (Appendix Ⅷ L). Residue on ignition to take this product 1.0g, according to inspection (Appendix Ⅷ N), no residue left over 0.1%. Iron salt residue on ignition key under the residue left over, add 1ml of nitric acid, evaporated on a water bath, add dilute hydrochloric acid 4ml, after tepid dissolved, moved to 50ml of Nessler tube, according to inspection (Appendix Ⅷ G), compare and contrast 1.0ml solution made with standard iron solution, not deeper (0.001%). Heavy metals in the product 1.0g, according to inspection (Appendix Ⅷ H Third Law), containing heavy metals should not exceed ten parts per million. Arsenic take this product 2.0g, dissolved in 23ml water, add 5ml of hydrochloric acid, check (Appendix Ⅷ J First Act) law, shall comply with the provisions of (0.0001%).
L-Citrulline MSDS
1 Basic information
Chinese name: L-citrulline, citrulline
Chinese alias: L (+) -2 – amino-5 – urea acid, urea, amino acid
English name: L-Citrulline; H-Cit-OH; L-Cit-OH
English Name: (S)-2-Amino-5-ureidopentanoic acid
Purity: ≥ 98%
CAS: 372-75-8
Molecular formula: C6H13N3O3
MW: 175.2
2 Characters
White crystalline powder; Solubility in water: 200 G / L (20 ° C), soluble in methanol and ethanol.
Three physical parameters
Melting point: 215 ℃
Specific rotation: +25.0 ~ +27.0 ° (c = 8, 6N HCl)
Loss on drying: <0.5%
Residue on ignition: <0.1%
Heavy metals: <20 ppm
Refractive index: 26 ° (C = 8, 6mol / L HCl)
4 Use Description
Enzymatic synthesis of NO from L-arginine production of NO, L-citrulline are intermediates.
5 storage conditions
2-8 ° C preservation
6 Hazard statement
Dangerous code: Xi
Hazard Class: R36/37/38
Security Level: S24/25-36-26
